TM 5-3895-379-23-1
0133
REMOVAL
1.
Disconnect electrical connector (Figure 1, Item 4) from engine wiring harness (Figure 1, Item 5).
2.
Remove nut (Figure 1, Item 10) and washer (Figure 1, Item 11) from ball joint (Figure 1, Item 2).
3.
Remove ball joint (Figure 1, Item 2) from governor control shaft (Figure 1, Item 1).
4.
Remove four nuts (Figure 1, Item 7), washers (Figure 1, Item 8), bolts (Figure 1, Item 3), and engine speed
control solenoid (Figure 1, Item 6) from bracket (Figure 1, Item 9).
5
4
3
1
6
2
2
11
10
9
8
7
M0606SWR
Figure 1. Throttle Control Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00071)