TM 5-3895-379-23-1
0123
REMOVAL
WARNING
Use caution and allow engine to cool before removal of component. Failure to follow this
warning may cause injury.
1.
Remove two screws (Figure 1, Item 1), tube assembly (Figure 1, Item 4), and gasket (Figure 1, Item 3) from
turbocharger (Figure 1, Item 2). Discard gasket.
1
4
3
2
M0504SWR
Figure 1.
Turbocharger Oil Lines, Hoses, and Fittings Removal.
2.
Remove screw (Figure 2, Item 2), spacer (Figure 2, Item 9), and clamp (Figure 2, Item 1) from engine block
(Figure 2, Item 8) and tube assembly (Figure 2, Item 7).
3.
Loosen nut (Figure 2, Item 6) and remove tube assembly (Figure 2, Item 7) from nipple (Figure 2, Item 3).
4.
If damaged, remove compression sleeve (Figure 2, Item 5) and nut (Figure 2, Item 6) from tube assembly
(Figure 2, Item 7).
5.
Remove adapter (Figure 2, Item 3) from manifold (Figure 2, Item 4).
03/15/2011Rel(1.8)root(maintwp)wpno(M00061)