TM 5-3895-379-23-1
0123
INSTALLATION
1.
Install new gasket (Figure 4, Item 1) and elbow (Figure 4, Item 3) on engine block with two screws
(Figure 4, Item 4). Tighten screws to 15-25 lb-ft (20-34 Nm).
2.
Install new gasket (Figure 4, Item 1) and tube (Figure 4, Item 7) on turbocharger (Figure 4, Item 2) with two
screws (Figure 4, Item 4). Tighten screws to 15-25 lb-ft (20-34 Nm).
3.
Install hose (Figure 4, Item 6) on tube (Figure 4, Item 7) and elbow (Figure 4, Item 3) and tighten two hose
clamps (Figure 4, Item 5).
1
2
7
4
5
6
5
M1081SWR
4
3
1
Figure 4.
Turbocharger Oil Lines, Hoses, and Fittings Installation.
4.
Install adapter (Figure 5, Item 3) on manifold (Figure 5, Item 4). Tighten adapter to 22-28 lb-ft (30-38 Nm).
5.
If removed, install compression sleeve (Figure 5, Item 5) and nut (Figure 5, Item 6) on tube assembly
(Figure 5, Item 7). Do not tighten nut.
6.
Install tube assembly (Figure 5, Item 7) on adapter (Figure 5, Item 3).
7.
Install clamp (Figure 5, Item 1) on tube assembly (Figure 5, Item 7).
8.
Install spacer (Figure 5, Item 9), clamp (Figure 5, Item 1), and tube assembly (Figure 5, Item 7) on engine block
(Figure 5, Item 8) with screw (Figure 5, Item 2). Tighten screw to 25 lb-ft (34 Nm).
9.
Tighten nut (Figure 5, Item 6) to 120-144 lb-in. (14-16 Nm).
03/15/2011Rel(1.8)root(maintwp)wpno(M00061)
