TM 5-3895-379-23-1
0114
FUEL INJECTOR LINES AND FITTINGS REMOVAL
NOTE
Cap all openings or plug all openings immediately.
1.
Remove fuel filter assembly (WP 0127).
2.
Disconnect four fuel injection lines (Figure 3, Item 2) from fuel injections nozzles (Figure 3, Item 1).
NOTE
Secure fittings (Figure 3, Item 7) with a wrench when removing fuel injection lines
(Figure 3, Item 2) at the fuel injection pump (Figure 3, Item 8).
3.
Disconnect four fuel injection lines (Figure 3, Item 2) from fuel injection pump (Figure 3, Item 8).
4.
Remove four fuel injection lines (Figure 3, Item 2) from roller.
5.
Remove bolt (Figure 3, Item 5), three bolts (Figure 3, Item 4), and eight washers (Figure 3, Item 3) from fuel
return line (Figure 3, Item 6). Discard washers.
6.
Remove fuel return line (Figure 3, Item 6).
1
2
3
4
5
6
7
M0145SWR
8
Figure 3. Fuel Injector Lines and Fittings Removal.
END OF TASK
FUEL INJECTOR LINES AND FITTINGS INSTALLATION
1.
Install fuel return lines (Figure 4, Item 6).
2.
Install eight washers (Figure 4, Item 3), three bolts (Figure 4, Item 4), and bolt (Figure 4, Item 5).
3.
Install four fuel injection lines (Figure 4, Item 2) to roller.
03/15/2011Rel(1.8)root(maintwp)wpno(M00052)
