TM 5-3895-379-23-1
0098
INSTALLATION - Continued
3.
Apply sealing compound to threads of connector (Figure 4, Item 8) and install in tee (Figure 4, Item 4).
4.
Coat new O-ring (Figure 4, Item 3) with oil and install on engine oil sampling valve (Figure 4, Item 2).
NOTE
When installing engine oil sampling valve, position drain of valve downward to ease in
collection of sample.
5.
Apply sealing compound to threads of engine oil sampling valve (Figure 4, Item 2) and install on connector
(Figure 4, Item 8). Tighten locking nut (Figure 4, Item 9).
6.
Install hourmeter pressure switch (Figure 4, Item 5) on tee (Figure 4, Item 4) and tighten to 60-108 lb-in.
(7-12 Nm).
7.
Connect hourmeter pressure switch connector (Figure 4, Item 6) to connector (Figure 4, Item 7).
8.
Install engine oil sampling valve drain cap (Figure 4, Item 1) on engine oil sampling valve (Figure 4, Item 2).
5
4
3
7
6
2
1
8
10
9
M1239SWR
Figure 4.
Engine Oil Sampling Valve and Fittings Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Fill engine to capacity with engine oil. (WP 0077)
2.
Start engine and check for leaks. (TM 5-3895-379-10)
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00037)