TM 5-3895-379-23-1
0095
INSTALLATION
1.
Apply a light coat of lubricating oil to new gasket (Figure 2, Item 9) and rubber brushing (Figure 2, Item 2) and
install gasket and rubber bushing on oil cooler (Figure 2, Item 8).
2.
Position oil cooler (Figure 2, Item 8) on oil filter head assembly (Figure 2, Item 1).
NOTE
On CB534B Roller, Item 7 is a ring. On CB534C Roller, Item 7 is a washer.
3.
Install new connector ring or washer (Figure 2, Item 7) on oil cooler (Figure 2, Item 8).
4.
Install connector (Figure 2, Item 6).
5.
Install hose assemblies (Figure 2, Items 4 and 5) on oil cooler (Figure 2, Item 8) and tighten two clamps
(Figure 2, Item 3).
4
5
3
3
2
1
6
7
8
9
M1212SWR
Figure 2.
Engine Oil Cooler Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Close right-side door assembly. (TM 5-3895-379-10)
2.
Fill cooling system to proper level. (WP 0139)
3.
Fill engine with oil. (WP 0077)
4.
Start engine and check for leaks. (TM 5-3895-379-10)
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00034)