TM 5-3895-379-23-1
0094
INSTALLATION - Continued
3.
Install two new O-rings (Figure 2, Item 5) on oil tube (Figure 2, Item 4) and connect oil tube (Figure 2, Item 4)
to oil relief valve (Figure 2, Item 12).
4.
Install engine oil relief valve (Figure 2, Item 12) on engine.
5.
Install bolt (Figure 2, Item 7) on engine oil relief valve (Figure 2, Item 12) and engine block (Figure 2, Item 3).
6.
Install two bolts (Figure 2, Item 2) to engine oil relief valve (Figure 2, Item 12) and engine oil pump
(Figure 2, Item 15).
7.
Install new gasket (Figure 2, Item 14), suction pipe (Figure 2, Item 11), and strainer (Figure 2, Item 8) on roller.
8.
Install bolt (Figure 2, Item 9) on oil pump support bracket (Figure 2, Item 10).
9.
Install two bolts (Figure 2, Item 1) on strainer (Figure 2, Item 8) and suction pipe (Figure 2, Item 11).
10.
Install No. 1 main bearing cap (Figure 2, Item 13) and two bolts (Figure 2, Item 6) on engine block
(Figure 2, Item 3). Tighten bolts to 195 lb-ft (264 Nm).
4, 5
2
7
8
6
3
9
1
15
14
12
11
10
13
M1101SWR
Figure 2. Engine Oil Pump Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install oil pan. (WP 0093)
2.
Fill engine with oil. (WP 0077)
3.
Start engine and check for leaks and proper operation. (TM 5-3895-379-10)
4.
Remove chocks. (TM 5-3895-379-10)
END OF TASK
END OF WORK PACKAGE
0094-3/4 blank
03/15/2011Rel(1.8)root(maintwp)wpno(M00033)