TM 5-3895-379-23-1
0093
INSTALLATION - Continued
5.
Install gasket (Figure 4, Item 3), breather tube bracket (Figure 4, Item 8), and oil pan (Figure 4, Item 6) on
engine (Figure 4, Item 2) with 12 screws (Figure 4, Item 7). Tighten screws to 15-25 lb-ft (20-34 Nm).
6.
Install six bolts (Figure 4, Item 5) on oil pan (Figure 4, Item 6). Tighten bolts to 15-25 lb-ft (20-34 Nm).
7.
Install four bolts (Figure 4, Item 4) on oil pan (Figure 4, Item 6). Tighten bolts to 15-25 lb-ft (20-34 Nm).
2
1
3
OPEN
4
CLOSE
5
6
8
7
M0095SWR
Figure 4.
Oil Pan Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install gauge rod (dipstick) tube assembly. (WP 0099)
2.
Fill engine with oil. (WP 0077)
3.
Operate roller and check for leaks. (TM 5-3895-379-10)
END OF TASK
END OF WORK PACKAGE
0093-5/6 blank
03/15/2011Rel(1.8)root(maintwp)wpno(M00032)