TM 5-3895-379-23-1
0089
INSTALLATION - Continued
NOTE
If removed, ensure pushrods are installed in original location and seated correctly on
valve lifters.
Ensure pushrods are seated properly under individual rocker arms and rocker arm
assembly sits evenly on cylinder head.
Ensure adjustment screws are properly seated in ends of pushrods. It may be necessary
to loosen adjustment screws to help prevent bent valves or pushrods during installation.
2.
Position rocker arm assembly (Figure 2, Item 2) on cylinder head (Figure 2, Item 5).
NOTE
Start from the center and tighten nuts and bolts outward.
Alternately tighten the nuts and bolts.
On aluminum bracket, tighten nuts and bolts to 30 lb-ft (41 Nm).
On cast iron or steel brackets, tighten nuts and bolts to 55 lb-ft (75 Nm).
3.
Install three bolts (Figure 2, Item 4) and nuts (Figure 2, Item 1) on rocker arm assembly (Figure 2, Item 2).
1
2
3
4
M0083SWR
5
Figure 2. Rocker Shaft Assembly Installation.
4.
Adjust valve lash (WP 0088).
END OF TASK
FOLLOW-ON MAINTENANCE
Install valve mechanism cover. (WP 0101)
END OF TASK
END OF WORK PACKAGE
0089-3/4 blank
03/15/2011Rel(1.8)root(maintwp)wpno(M00028)