TM 5-3895-379-23-1
0090
ASSEMBLY
NOTE
Make sure all oil holes in rocker shaft and in rocker levers are not clogged or plugged
before beginning assembly procedure.
When assembling, make sure bolt and oil supply connection are correctly positioned on
rocker shaft.
Lubricate all components with clean engine oil before beginning assembly procedure.
1.
If removed, install oil supply connection (Figure 2, Item 8) and bolt (Figure 2, Item 9) on rocker shaft
(Figure 2, Item 10).
NOTE
Bushings may require reaming to fit. Ream new arm bushing to a clearance of 0.0024 +/-
0.0012 in. (0.06 +/- 0.03 mm).
2.
Install arm bushing (Figure 2, Item 7) on rocker shaft (Figure 2, Item 10).
NOTE
Install each of the components in the correct order onto rocker shaft.
Ensure bolts and connectors are correctly positioned on rocker shaft.
3.
Install remaining washers (Figure 2, Item 6), springs (Figure 2, Item 5), rocker shaft brackets
(Figure 2, Item 4), and rocker arms (Figure 2, Item 3) on rocker shaft (Figure 2, Item 10).
4.
Install two new washers (Figure 2, Item 2) and new retaining rings (Figure 2, Item 1) each end of rocker arm
(Figure 2, Item 3).
12
3
4
5
6
M0086SWR
10
9
8
7
Figure 2. Rocker Arm Assembly.
END OF TASK
FOLLOW-ON MAINTENANCE
Install rocker shaft assembly. (WP 0089)
END OF TASK
END OF WORK PACKAGE
0090-3/4 blank
03/15/2011Rel(1.8)root(maintwp)wpno(M00029)