TM 5-3895-379-23-1
0036
MALFUNCTION
No Power To Warning Light Relay.
CORRECTIVE ACTION
1.
Remove nine screws and washers and remove panel from operator station.
2.
Remove harness connector from warning light relay.
3.
Turn battery disconnect switch to ON position (TM 5-3895-379-10).
4.
Turn engine start switch to ON position (TM 5-3895-379-10).
5.
Touch positive (+) probe of multimeter to terminal 1 (wire C931-OR).
6.
Touch negative (-) probe of multimeter to good ground.
7.
Turn engine start switch to OFF position (TM 5-3895-379-10).
8.
Turn battery disconnect switch to OFF position (TM 5-3895-379-10).
If 24 to 28 VDC are not measured at terminal 1 (wire C931-OR) and GAUGES fuse is good,
repair or replace wire C931-OR (WP 0195).
PANEL
SCREW
ASSEMBLY
WASHER
SCREW
WASHER
2
RELAY
3
1
4
HARNESS
CONNECTOR
5
OPERATOR
FUNCTIONAL
STATION
LIGHT RELAY
T0099SWR
Figure 8. Warning Light Relay Wiring.
03/15/2011Rel(1.8)root(tswp)wpno(T00042)