TM 5-3895-379-10
DRUM SCRAPER SERVICE
THIS WORK PACKAGE COVERS
Cleaning and Inspection, Adjustment
INITIAL SETUP
Equipment Condition
Tools and Special Tools
Roller parked on level ground (WP 0005 00)
Socket, socket wrench (Item 3, WP 0027 00)
Drums chocked (WP 0005 00)
Handle, socket wrench (Item 7, WP 0027 00)
Engine off (WP 0005 00)
Materials/Parts
Rag, wiping (Item 16, WP 0029 00)
NOTE
There are four scraper assemblies located on front and rear of each drum. All scraper assemblies are serviced
the same way. This work package covers one CB534B Roller scraper assembly. The CB534C Roller scraper
assembly is serviced the same way, except as noted.
CLEANING AND INSPECTION
1.
Wipe scraper with clean rag.
2.
Inspect scraper for cracks or chips. If damaged, notify supervisor.
3.
Adjust scraper pressure. Refer to Adjustment in this work package.
