TM 5-3895-379-10
ADJUST HANDRAILS FOR OPERATION OR STOWAGE - CONTINUED
0022 00
ADJUST FOR STOWAGE
1.
Remove 24 mm wrench from toolbox.
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure. Fail-
ure to follow this warning may cause injury.
CAUTION
Failure to hold handrail assembly in place during removal will allow handrail assembly to fall and become
damaged.
2.
While assistant holds left handrail assembly (1), remove two bolts (2) and washers (3) from plate assemblies (4) using
24 mm wrench.
3.
Raise handrail assembly (1) until holes in handrail align with top holes in plate assemblies (4).
4.
Install two washers (3) and bolts (2) in middle holes in handrail assembly (1) and plate assemblies (4). Tighten bolts
securely using 24 mm wrench.
HANDRAILS
HANDRAIL
POSITIONED
TOOLBOX
IN STOWED
FOR
POSITION
STOWAGE
1
3
2
4
401-2196
5.
Repeat steps 1 through 4 for right handrail.
6.
Stow 24 mm wrench in toolbox.
7.
Remove chocks (WP 0005 00).
END OF WORK PACKAGE
0022 00-2
