TM 5-3895-379-10
VIBRATORY BEARING RESERVOIR CHECK AND SERVICE - CONTINUED
0020 00
FILL
1.
Remove 1/2 in. drive ratchet from toolbox.
WARNING
Oil is very slippery. Immediately wipe up any spills. Failure to follow this warning may cause injury.
NOTE
Use a container to catch any oil that may drain from system. Dispose of oil IAW local policy and ordinances.
2.
Remove plug (4) from vibratory reservoir (5) using 1/2 in. drive ratchet.
3.
4.
Clean plug (4) and area around plug opening.
5.
Inspect threads on plug (4) for crossed or peeled condition.
NOTE
Notify Field Maintenance for replacement of damaged plug.
6.
Install plug (4) in vibratory reservoir (5) using 1/2 in. drive ratchet. Tighten plug securely.
7.
Stow 1/2 in. drive ratchet in toolbox.
3
5
4
2
1
401-2179
END OF WORK PACKAGE
0020 00-2
