TM 5-3895-379-10
OPERATION UNDER USUAL CONDITIONS - CONTINUED
0005 00
OPENING/CLOSING DOOR ASSEMBLIES
WARNING
There is no clearance for personnel between frame and yoke when roller turns. Injury or death from
crushing could occur.
Steering frame must be locked before lifting, transporting or servicing roller in articulation area to pre-
vent injury or death from crushing.
NOTE
Right and left-side door assemblies are opened and closed the same way. Right-side door assembly is shown.
Open Door Assembly.
1.
a.
If opening door to check or service engine compartment with engine running, shut off engine and lock steering
frame. Refer to Initial Adjustments and Daily Checks and Operate Engine in this work package.
b.
Lift latch (1), pull handle (2) up and toward front of roller (3) and open door assembly (4).
c. Unhook lanyard (5) from eye on door assembly (4) and hook to eye on frame assembly (6).
Close Door Assembly.
2.
a.
Unhook lanyard (5) from frame assembly (6) and hook to door assembly (4).
b.
Close and hold door assembly (4), tightly against frame.
c.
Push handle (2) into latch (1) and close latch.
d.
If steering frame was locked, shut off engine and unlock steering frame. Refer to Initial Adjustments and Daily
Checks and Operate Engine in this work package.
6
5
4
3
4
1
2
401-2193
0005 00-20
