TM 5-3895-379-10
OPERATION UNDER USUAL CONDITIONS - CONTINUED
0005 00
TOWING INSTRUCTIONS - CONTINUED
1.
If the engine is not running, manually release parking brake (WP 0006 00).
2.
Refer to FM 9-43-2 and attach tow bar to roller at tiedown points.
3.
Attach tow bar to towing vehicle.
4.
Refer to FM 9-43-2 and slowly tow the disabled roller.
PREPARATION FOR TRANSPORT
NOTE
Preparation for transport procedures are the same for CB534B and CB534C Rollers. CB534B Roller is
shown.
Obey all state and local laws governing characteristics of a load (height, weight, width and length).
Observe all regulations governing wide loads.
Ensure that cooling system has proper antifreeze mix if transporting roller to a colder climate.
1.
General Transport Instructions.
a.
Investigate travel route for overpass clearances. Ensure that there is adequate clearance for roller being trans-
ported. Refer to WP 0002 00 for roller dimensions.
b.
Before loading roller, remove ice, snow and other slippery material from loading dock and truck bed to prevent
slippage of roller and shifting while in transit.
c.
Before loading roller, place chock block in front of and behind trailer or railcar wheels. Apply parking brake.
d.
Travel at moderate speed and observe all speed limitations when transporting roller.
0005 00-22
