TM 5-3895-379-10
OPERATION UNDER USUAL CONDITIONS - CONTINUED
0005 00
OPERATE VIBRATORY SYSTEM - CONTINUED
2.
Select Manual or Automatic Mode.
NOTE
3
In automatic mode, vibratory system acti-
vates automatically when propel control
lever is moved to forward or reverse posi-
tion. The speed needed to activate vibra-
tory system can be adjusted by Field
Maintenance.
a.
Move the vibratory control switch (2) forward to
activate the vibratory system in the automatic
mode.
2
NOTE
1
When the vibration control switch is in the
rear position, the vibratory system can be
activated at any time, including while the
roller is stopped.
4
b.
Move the vibratory control switch (2) to the rear
position to activate the vibratory system in the
401-046
manual mode.
3.
Turn Vibratory System On and Off.
WARNING
Do not turn vibratory system on while roller is standing still on a very solid surface. A loss of steering can be
experienced which could result in injury.
CAUTION
Never start or stop the roller abruptly. Damage to the propel and braking systems can occur.
NOTE
When the vibration push switch is on, the vibratory system indicator light will be on while the engine is run-
ning.
a.
Press the vibration push switch (3) to turn the vibratory system on.
b.
Press the vibration push switch (3) again to turn the vibratory system off.
0005 00-15
