TM 5-3895-379-10
OPERATION UNDER USUAL CONDITIONS - CONTINUED
0005 00
PREPARATION FOR TRANSPORT - CONTINUED
2.
Lift Machine onto Shipping Bed.
NOTE
Refer to Equipment Data in WP 0002 00 and roller shipping date plate (WP 0007 00) for information on
roller dimensions and weights and for instructions on lift points.
a.
Ensure that all water tanks are empty (WP 0024 00).
WARNING
Steering frame must be locked before lifting roller, to prevent injury or death from crushing.
b.
Lock steering frame as follows.
(1)
Remove clip (1) and pin (2) from articu-
lation yoke (3).
(2)
Position steering frame lock bolt (4) to
bottom of slot in articulation yoke (3).
(3)
Install pin (2) in bottom hole in articula-
tion yoke (3), ensuring steering frame
lock bolt (4) is below pin (2).
(4)
Install clip (1) in pin (2).
c.
Position crane or other lifting device so that
roller will be lifted in level position.
UNLOCKED
POSITION
1
4
LOCKED
2
POSITION
3
401-2166
0005 00-23
