SECTION 7
TRANSMISSION
FIGURE 7-64.
FIGURE 7-62.
FIGURE 7-65.
FIGURE 7-66.
FIGURE 7-63.
CAUTION: Always replace both stationary and rotating
parts of the seal. DO NOT mix old and new parts.
a. Wash and clean air dry new seal parts.
b. Install the seal springs into the aluminum seal
retainer. Install the new o-rings (dry) on stationary steel
part of seal into retainer so notch is located in pin in
retainers (see figure 7-65).
c.
Install large o-ring O.D. of retainer (see figure 7-65).
FIGURE 7-67.
7-42.
