TM 5-3895-383-24
3.
Remove eight bolts (21), and remove end cover (20)
from the housing.
4.
Remove control lens (23) from end cover (20). Remove
lens pin (22) from the stroking piston.
5.
Remove plug (25), and remove stroking piston (24) from
end cover (20). Remove the O-ring seal from plug (25).
Check the O-ring seal for wear or damage and replace if
necessary.
6.
Remove plug (30), spring (28), bushing control (27) and
spool (26) from end cover (20). Remove the O-ring seal
from plug (30). Check the O-ring seal for wear or
damage and replace if necessary.
7.
Remove plug (35), throttle screw (32), shuttle (31) and
throttle screw (29) from the end cover. Remove the
O-ring seal from plug (35). Check the O-ring seal for
wear or damage and replace if necessary.
8.
Remove two plugs (36), two throttle screws (34), throttle
pin (33), shuttle (31) and two throttle screws (2) from the
end cover. Remove the O-ring seals from plugs (36).
Check the O-ring seal for wear or damage and replace if
necessary.
14-127
