Remove lock (29) from the axle retainer bolt.
Remove axle retainer bolt (31), washer (30) and spacer
Remove planetary gear group (33).
If necessary, use Tooling (B) to remove bearing (34)
from the carrier.
Straighten one end of retainer ring (35). Rotate the ring
until a gear shaft can be removed.
Keep each gear assembly together. Do not mix
components between gear assemblies. Note the
location of each gear assembly in the carrier for
Remove gear shaft (40). Remove two washes (39) and
gear (36). Remove two sets of roller bearings (37) and
spacer (38) from the gear.
Repeat Step 29 to remove the remaining two gears
assemblies from the carrier.