TM 5-3895-383-24
13.
Remove two bolts (11), and remove thrust block (12)
from the left side axle assembly.
14.
Remove two nuts (14) and the six bolts, and remove
inner brake housing (13) from the left side axle
assembly.
NOTE:
The shim located under bearing cup (15) is used
to adjust the differential bearing preload.
15.
If necessary, remove bearing cup (15) and the shim
from inner brake housing (13).
16.
Remove two discs (16) and the plate.
17.
Remove brake actuator assembly (17) from the left side
axle assembly. The brake control rod must be removed
from the seal.
14-67
