TM 5-3895-383-24
54.
Use Tooling (G) to remove bearing (69) from the pinion.
55.
Use Tooling (G) to remove bearing (70) from pinion
(62).
56.
Remove the two nuts and bracket (71).
57.
At the bottom of the axle assembly, remove the four
bolts that fasten right side axle housing (72) to the
differential housing.
58.
Attach lifting straps and a hoist to right side axle
assembly (72) as shown. Remove remaining seven
bolts (73), and remove right side axle housing (72) from
the differential housing. The weight of the right side
axle housing is 117 kg (260 lb). Remove the O-ring seal
from the right side axle housing. Check the O-ring seal
for wear or damage and replace if necessary.
59.
Use Tooling (A) to support right side axle assembly (72)
as shown.
60.
Follow Steps 14 and 16 thru 34 for the disassembly of
right side axle assembly (72).
14-73
