TM 5-3895-383-24
NOTICE
Do not overfill the crankcase. The oil level must not reach
the top of the FULL range mark or above the FULL range
mark.
Illustration 218
3.
Maintain the oil level on the dipstick between the FULL
RANGE mark and the ADD OIL mark. Add oil if the oil
level is too low.
NOTE:
Operating your engine with the oil level above the
FULL mark in the FULL Range could cause the
crankshaft to dip into the oil. This could result in
excessively high operating temperatures. The
high operating temperatures could result in
reduced lubricating characteristics of the oil. This
could cause damage to the bearings and loss of
engine power.
Add the Engine Oil
Illustration 219
1.
Open the engine compartment.
Illustration 220
2.
Remove the oil filler plug (2).
3.
Add the oil.
4.
Clean the oil filler plug. Install the oil filler plug.
5.
Close the engine com partment.
Maintenance Section
Engine Oil Level - Check
1-96
