TM 5-3895-383-24
Engine Air Filter Service Indicator - Inspect
SMCS Code:
7452-040
Illustration 208
1.
Open the engine compartment access door
2.
Start the engine.
3.
Run the engine at high idle.
Illustration 209
4.
If the yellow piston in the engine air filter service
indicator enters the red zone, service the air cleaner.
5.
Stop the engine.
NOTE:
See the Operation and Maintenance Manual,
"Engine
Air
Filter
Primary
Element
-
Clean/Replace".
See
the
Operation
and
Maintenance Manual, "Engine Air Filter Secondary
Element - Replace".
6.
Close the engine compartment access door.
Engine Crankcase Breather - Clean
SMCS Code:
1317-070
Illustration 210
1.
Open the engine compartment.
Illustration 211
2.
Loosen the hose clamp (2). Remove the hose (3) from
the breather.
3.
Remove bolt (1). Remove the breather (4) and the O-
ring seal.
4.
Wash the breather (4) in clean nonflammable solvent.
Dry the breather (4) with pressure air.
5.
Install the O-ring seal. Install the clean breather.
6.
Tighten the bolt (1) to a torque of 7 ± 2 N m (5 ± 1 lb-ft).
7.
Install the hose (3) onto the breather (4). Tighten the
hose clamp (2).
8.
Close the engine compartment.
Maintenance Section
Engine Air Filter Service Indicator - Inspect
1-93
