TM 5-3895-383-24
Engine
Governor
Oil
Supply
Screen
-
Clean
inspect/Replace
SMCS Code:
1264-510-Z3; 1264-571-Z3;
1278-510-Z3; 1278-571-Z3
Illustration 212
1.
Open the engine compartment.
Illustration 213
2.
Place a suitable container under the oil supply tube.
Remove the oil supply tube (1) from the cylinder head.
3.
Remove the fitting (3) and the seal (2) from the governor
housing.
4.
Use a 6 mm hexagon wrench in order to remove the
screen (4).
5.
Wash the screen (4) in solvent in order to remove any
debris.
6.
Inspect the screen (4) for damage. Replace damaged
parts.
7.
Install the screen (4). Allow clearance for the fitting (3).
8.
Install the seal (2). Install the fitting (3). Install the oil
supply tube (1).
NOTE:
Dispose of the fluids in an appropriate manner.
9.
Close the engine compartment.
Maintenance Section
Engine Governor Oil Supply Screen -
Clean/Inspect/Replace
1-94