TM 5-3895-382-24
23.
Remove bearing rings (37) from the inner grooves of the
servo piston. Remove piston rings (38) and the two O-
ring seals from the outer grooves of the servo piston.
Check the bearing rings, the piston rings and the O-ring
seals for damage or wear and replace if necessary.
24.
Remove plug (46), spring (45) and poppet (43) from the
housing. Remove the shims and the O-ring seal from
plug (46). Check the O-ring seal for damage or wear
and replace if necessary.
25.
Remove plug (41) and spring (44) from both sides of the
housing. Remove the O-ring seal from each plug (41).
Check the O-ring seal for damage or wear and replace if
necessary.
26.
Remove spring guide (40), valve spool (39) and spring
guide (42) from the housing.
Assemble Axle Propel Motor
5058-016
Tools Needed
A
B
C
1P-1862
Pliers
1
1P-1860
Pliers
1
2P-8312
Pliers
1
1.
Be sure all parts of the axle propel motor are clean and
free of dirt and debris prior to assembly.
2.
Install spring guides (40) and (42) on valve spool (39).
Install the valve spool in housing (22).
3.
Install the O-ring seal on both plugs (41). Install both
springs (44) and both plugs (41) in the housing.
4.
Install the O-ring seal on plug (46). Install the shims in
the plug. Install poppet (43), spring (45) and plug (46) in
the housing.
16-93
