TM 5-3895-382-24
Pump Drive
Remove & Install Pump Drive
3108-010
Start By:
a.
remove propel and vibratory pumps
NOTE:
In the following procedure, the engine was
removed for better photo illustration of the pump
drive. The engine does not have to be removed in
order to service the pump drive.
1.
Remove four bolts (2) and support (3).
2.
Remove the remaining eight bolts, and remove adapter
(1) from the flywheel housing.
3.
Remove eight bolts (4), and remove flange (5) from the
flywheel. When installing flange (5) apply 9S-3263
Thread Lock on the threads of bolts (4).
NOTE:
For installation of the pump drive, revere the
removal steps.
End By:
a.
install propel and vibratory pumps 16-81
16-81
