TM 5-3895-382-24
Drum Propel Motor
Type of Motor: Piston (variable displacement)
Rotation is counterclockwise or clockwise by viewing from the
output shaft end.
Motor displacement (maximum) ............................... 46.0 cm3/rev
(2.80 in3/rev)
Motor displacement (minimum) ................................ 22.5 cm3/rev
(1.37 in3/rev)
Loop flushing valve setting of 1378 kPa (200 psi) at 2.5 gpm.
(A)
Maximum displacement screw setting ................20.6 mm
(.81 in)
(B)
Minimum displacement screw setting .................17.5 mm
(.69 in)
Drum Drive
(1)
Tighten ten nuts to a torque of ....................680 60 Nm
(503 44 lb-ft)
Gear Reducer
Output torque capacity .................................................18 000 Nm
(13 320 lb-ft)
10-7
