TM 5-3895-382-24
10.
Matchmark housing assemblies.
11.
Remove five bolts (23), housing assembly (24), and
starter motor drive assembly (25).
12.
Matchmark housing assemblies.
13.
Remove two bolts (26) and housing assembly (27).
14.
Remove armature assembly (28).
15.
Remove roll pin (29) and lift plate assembly (30).
16.
Remove eight shoe pole screws (31), four shoe poles
(32), insulator (33), and starting motor coil (34).
17.
Remove retaining ring (35).
18.
Remove spring retainer (36), spring (37), boot (38),
spring retainer (39), and washer (40).
NOTE:
To assemble starting motor, reverse disassembly
steps.
End By:
a.
Install starting motor.
s8-5
