TM 5-3895-382-24
Starter
Disassemble & Assemble Starter
Start By:
a.
remove starting motor.
1.
Remove nut (1), washer (2) and connector (3).
2.
Remove nut (4) and starting motor cover (5).
3.
Remove nut (6), washer (7) and connector (3).
4.
Remove nut (8) and washer (9).
5.
Remove bolt (10), washer (11), starting motor terminal
(12), insulator (13) and insulator (14).
6.
Remove lever housing plug (15) and gasket (16).
7.
Remove three bolts (17) and washers (18).
8.
Pull back on solenoid assembly (19) and remove nut
(20) and solenoid.
9.
Remove six bolts (21) and housing assembly (22).
8-4
