TM 5-3895-382-24
Muffler
SMCS Code: 1062
Illustration 28
(1)
Tighten the nuts to the following
torque: ...........................................30 7 Nm (22 5 lb-ft)
(2)
Tighten the bolts and the nuts to the following
torque: ........................................ 55 10 Nm (41 7 lb-ft)
Camshaft
SMCS Code: 1210
Illustration 29
(1)
Pushrod
(2)
End play of a new camshaft ................... 0.10 to 0.41 mm
(0.004 to 0.016 inch)
Maximum permissible end play of a worn
camshaft ........................................................0.53 mm (0.021 inch)
(3)
Tighten the bolt that holds the camshaft gear on the
camshaft to the following torque: ...........................78 Nm
(58 lb-ft)
(
(4)
Camshaft thrust washer
Thickness of thrust washer ..................... 5.49 to 5.54 mm
(0.216 to 0.218 inch)
Cylinder block recess depth for thrust
washer ........................................................ 5.46 to 5.54 mm
(0.215 to 0.218 inch)
Relationship of thrust washer to cylinder block
front face .................................................-0.05 to +0.08 mm
(-0.002 to +0.003 inch)
(5)
Diameter of camshaft journals
Table 4
Diameters of Camshaft Journals
Camshaft
Journal Number
Standard
Diameter
Service Limit
Diameter (1)
1
50.710 to 50.740
50.660 mm
mm (1.9965 to
(1.9945 inch)
1.9975 inch)
2
50.460 to 50.480
50.410 mm
mm (1.9865 to
(1.9845 inch)
1.9875 inch)
3
49.950 to 49.980
49.900 mm
mm (1.9965 to
(1.9645 inch)
1.9675 inch)
(1) The service limit the maximum or the minimum dimension which s
specified for a par. A part which has reached the service limit must
be replaced.
Internal clearance of the journal ........................ 0.06 to 0.14 mm
(0.002 to 0.006 inch)
(6)
Tappet
Shank diameter ....................................18.99 to 19.01 mm
(0.748 to 0.749 inch)
Diameter of bore in block for
tappet .....................................................19.05 to 19.08 mm
(0.750 to 0.751 inch)
Running clearance between tappet and
block ........................................................... 0.04 to 0.09 mm
(0.002 to 0.004 inch)
5-22
