TM 5-3895-382-24
(35)
Position link (14) on link (11) on right side of
seat suspension assembly (15) ensuring that
hole is fully seated on shoulder of stud.
(36)
Apply sealant to threads of locknut (12).
(37)
Install link (14) on link (11) with washer (13) and
locknut (12).
(38)
Position link (14) on fingers of latch assembly
(19).
(39)
Position torsion spring (16) and link (11) on
upper housing assembly (21).
(40)
Install ends of torsion spring (16) in left side of
upper housing assembly (21) and link (11).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and Clothing. To avoid injury or death, keep away
from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or Clothing, wash immediately with soap and water.
(41)
Apply sealant to threads of bolts (17).
(42)
Install torsion spring (16) and link (11) on upper
housing assembly (21) with two bolts (17), using
socket wrench screwdriver attachment.
(43)
Position link (14) on links (11) on left side of seat
suspension assembly (15) ensuring that holes
are fully seated on shoulder of stud.
(44)
Apply sealant to threads of locknuts (12).
(45)
Install link (14) on links (11) with two washers
(13) and locknuts (12). Tighten locknuts to 7.4
to 16.2 lb-ft (10 - 22 Nm).
2-70
![](//www.tpub.com/assessment.jpg)