TM 5-3895-382-24
(46)
Install left angle assembly (7), and right angle
assembly (8) on two links (11) with four washers
(10) and locknuts (9). Tighten nuts to 7.4 to
16.2 lb-ft (10 - 22 Nm).
(47)
Install channel (6) from left angle assembly (7)
and right angle assembly (8) with four bolts (5).
Tighten bolts to 7.4 to 16.2 lb-ft (10 - 22 Nm).
(48)
Install knob (2) on bevel gear (4) with spring pin
(3).
(49)
Adjust angle bracket (32) so that bevel gear (4)
fits snugly against gear assembly (29) and knob
(2) feels firm.
(50)
Tighten locknuts (33).
NOTE
Follow-on Maintenance: Install seat suspension assembly.
END OF TASK
2-71
