TM 5-3895-382-24
2-19. STOWAGE BOX REPLACEMENT
This Task Covers:
a. Removal
b. Installation
INITIAL SETUP
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive,
Engine OFF (TM 5-3895-382-10)
(SC 5180-90-N26), Tool Number W33004,
Wheels and drum chocked
NSN 5180-00-177-7033
Wrench, Torque (0-170 lb-ft),
NSN 5120-00-640-6364,
(Included in T13152 and W32593)
a. Removal
(1)
Open lid (1) of stowage box (2).
(2)
Remove four nuts (3), washers (4), bolts (5), washers (4), and stowage box (2) from two plates (6).
(3)
Remove four bolts (7), washers (8), and two plates (6) from frame (9).
b. Installation.
(1)
Install two plates (6) on frame (9) with four washers (8) and bolts (7). Tighten nuts to 40 lb-ft (55 Nm).
(2)
Install stowage box (2) on two plates (6) with four bolts (4), eight washers (5), and four nuts (3). Tighten nuts to
40 lb-ft (55 Nm).
(3)
Close lid (1) of stowage box (2).
NOTE
Follow-on Maintenance: Remove chocks.
END OF TASK
2-72
