TM 5-3895-382-24
c. Cleaning/Inspection.
WARNING
·
Drycleaning Solvent (P-D-680, Type III) is TOXIC and flammable. Wear
protective goggles and gloves; use only in a well-ventilated area; avoid contact
with skin, eyes, and clothes; and, do not breathe vapors. Keep away from heat
or flame. Never smoke when using solvent; the flashpoint for type III
drycleaning solvent is 200° F (93° C). Failure to do so may result in injury or
death to personnel.
·
If personnel become dizzy while using cleaning solvent, immediately get fresh
air and medical help. If solvent contacts skin or clothes, flush with cold water.
If solvent contacts eyes, immediately flush eyes with water and get immediate
medical attention.
(1)
Clean all metal parts with drycleaning solvent.
WARNING
Compressed air is used for cleaning purposes and shall not exceed 30 psi (207
kPa). Use only with effective chip guarding and personal protective equipment
(goggles, gloves, etc.).
(2)
Dry all parts with compressed air.
(3)
Inspect blade assembly for rust, cracks, dents, bends, broken or cracked welds, and holes.
(4)
Repair or replace all damaged parts.
2-32
