TM 5-3895-379-23
YOKE REPLACEMENT - CONTINUED
0198 00
CHECK VERTICAL STEER PIVOT CLEARANCE
NOTE
After installation of the drum assembly, the clearance between vertical bushings and vertical pins must be
checked.
1.
Position roller on a hard, level surface. Stop engine and apply parking brake (TM 5-3895-379-10).
2.
Attach base of dial indicator to top of steering pivot
DIAL
housing as shown. Set dial indicator actuator on top of
INDICATOR
rear frame.
3.
Set dial indicator to zero.
4.
Put a hydraulic jack under rear frame at pivot assem-
bly.
5.
Raise hydraulic jack to obtain greatest dial indicator
reading. Record this dimension.
401-887
0198 00-7
