TM 5-3895-379-23
STEERING HOSES, LINES AND FITTINGS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
References
Tools and Special Tools
Tool kit, general mechanic's (Item 36, WP 0220 00)
tenance Checks and Services (PMCS) Introduc-
Shop equipment, general purpose (Item 30, WP
tion
Materials/Parts
tenance Checks and Services (PMCS)
Cap set, protective (Item 8, WP 0219 00)
Rag, wiping (Item 31, WP 0219 00)
TM 5-3895-379-23P, Figures 90, 91and 102
Tag, marker (Item 37, WP 0219 00)
Equipment Condition
Gasket
Engine off (TM 5-3895-379-10)
O-ring (6)
Battery disconnect switch in OFF position (TM 5-
3895-379-10)
Operator platform assembly raised (WP 0128 00)
Right- and left-side door assemblies opened (TM 5-
3895-379-10)
Fuel/hydraulic oil tank drained (WP 0037 00)
REMOVAL
WARNING
Fuel and oil are very slippery. Use container to capture any fluid which may drain from lines. Dispose of
IAW local policy and ordinances. Ensure all spills are cleaned up.
CAUTION
Wipe area clean around all hydraulic connections to be opened during removal. Cap lines and plug openings
after removing lines. Contamination of hydraulic system could result in premature failure of the roller.
NOTE
Tag and mark all hydraulic lines and hoses to ensure correct installation.
Inspect all hoses, lines and fittings for cracks, bends, nicks, dents, stripped treads and cuts. Replace all
damaged parts.
