TM 5-3895-379-23
STEERING PIVOT REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
References
Tool kit, general mechanic's (Item 36, WP 0220 00)
TM 5-3895-379-10
Shop equipment, general purpose (Item 30, WP
TM 5-3895-379-23P, Figure 94
Personnel Required
Materials/Parts
Two
Cleaning compound, solvent (Item 9, WP 0219
Equipment Condition
Grease, automotive (Item 19, WP 0219 00)
Operator platform assembly raised (WP 0128 00)
Rag, wiping (Item 31, WP 0219 00)
Yoke removed (WP 0198 00)
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
REMOVAL
5
1,2
4 (HIDDEN)
1.
Remove two bolts (1), washers (2), nuts (3) and pins
(4) that fasten steering cylinder (5) to steering pivot
assembly (6). Repeat step one for other steering cylin-
der.
401-890
3
6
