TM 5-3895-379-23
STEERING CONTROL UNIT (SCU) REPAIR - CONTINUED
0195 00
ASSEMBLY - CONTINUED
18.
Install seal (15) in end cap (14).
15
14
401-835
19.
Install cap (14) with seven screws (13) on steering
control unit (SCU). Tighten capscrews in sequence
shown to 150 lb-in (17 Nm) 275 lb-in (31 Nm).
13
14
401-834
20.
Install steering control unit (SCU). Refer to Installation in this work package.
INSTALLATION
1.
Spline the steering control unit (SCU) (10) in steering
8
9 (HIDDEN)
6
column (6).
2.
Install four new lockwashers (12) and bolts (11) to fas-
ten steering control unit (10) and steering column (6)
and console (3). Tighten bolts to 10-25 lb-ft (14-34
Nm).
NOTE
Remove all caps and plugs from hoses prior
to installation.
Remove tags from hoses after hoses are con-
11,12 11,12
nected correctly.
401-833
10
3.
Install new O-rings (9) into four hoses (8).
4.
Connect four hoses (8) to steering control unit (10).
0195 00-12
