TM 5-3895-379-23
FUEL INJECTION PUMP REPLACEMENT - CONTINUED
0178 00
INSTALLATION
1.
Lightly apply a coat of clean engine oil to new O-ring (7) and install O-ring on fuel injection pump (3).
2.
Install new gasket (5) on timing case (6).
3.
Align marks (1) to postition fuel injection pump (3).
4.
Install three nuts (4) and fuel injection pump (3) on timing case (6). Tighten nuts to 16 lb-ft (22 Nm).
5.
Connect hose (2) to fuel injection pump (3).
2
1
6
3
5
401-951
401-952
7
2
4
3
6.
Install fuel injection pump gear (WP 0177 00).
7.
Connect throttle control cable or throttle control (WP 0045 00 or WP 0047 00).
8.
Operate roller and check for proper operation (TM 5-3895-379-10).
END OF WORK PACKAGE
0178 00-2
