TM 5-3895-379-23
FUEL INJECTION PUMP GEAR REPLACEMENT - CONTINUED
0177 00
METHOD 2 (TIMING GEAR CASE COVER ON) REMOVAL
1.
Remove four bolts (5) and cover (6).
2.
Remove nut (7) and lockwasher (8).
5
7,8
6
3
401-2011
3,4
3.
Rotate crankshaft until keyway is at 1:00 o'clock.
4.
Install gear puller and disengage fuel injection pump
gear (3) from fuel injection pump (4).
METHOD 2 (TIMING GEAR CASE COVER ON)
INSTALLATION
1.
Install lockwasher (8) and nut (7). Tighten nut to 58
lb-ft (78 Nm).
2.
Install four bolts (5) and cover (6).
3.
Rotate crankshaft until keyway is at 1:00 o'clock.
Install fuel injection pump gear (3) to fuel injection
401-2035
pump (4).
4.
Install crankshaft pulley (WP 0167 00).
5.
Install water pump (WP 0057 00).
6.
Install fan (WP 0059 00).
7.
Lower operator platform (WP 0128 00).
END OF WORK PACKAGE
0177 00-3/(0177 00-4 Blank)
