TM 5-3895-379-23
FUEL INJECTOR AND NOZZLE REPLACEMENT (CB534C) - CONTINUED
0176 00
INSTALLATION
CAUTION
Do not rotate injection nozzle after installation. The seal made by the antiseize compound could break. A
broken seal may allow leakage past the seat of the fuel injection nozzle, resulting in poor performance.
1.
Clean threads on fuel injector (4) and mating surface of cylinder head.
2.
Place a 0.08 inch (2.0 mm) bead of antiseize compound to the first two threads of injector (4).
3.
Install washer (5) on injector (4).
4.
Position injector (4) by making sure detent ball (6) is aligned with detent (7) in cylinder head (8).
7
4
6
401-2105
8
5.
Gradually and evenly tighten fuel injector (4). Tighten to 22 lb-ft (30 Nm) and remove excess antiseize compound.
6.
Install fuel injector lines (WP 0030 00).
7.
Lower operator platform (WP 0128 00).
8.
Start engine and check for leaks (TM 5-3895-379-10).
END OF WORK PACKAGE
0176 00-3/(0176 00-4 Blank)
