TM 5-3895-379-23
FUEL INJECTION PUMP REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
References
TM 5-3895-379-10
Tool kit, general mechanic's (Item 36, WP 0220 00)
TM 5-3895-379-23P, Figure 20
Shop equipment, general purpose (Item 30, WP
Equipment Condition
Throttle cable disconnected (CB534B) (WP 0045
Materials/Parts
Cap set, protective (Item 8, WP 0219 00)
Throttle control disconnected (CB534C) (WP
Gasket
O-ring
Fuel injection pump gear removed (WP 0177 00)
NOTE
Cap and plug all openings to prevent any contaminants from entering the system.
REMOVAL
1.
Place position marks (1) on fuel injection pump.
2.
Disconnect hose (2) from fuel injection pump (3).
3.
Remove three nuts (4) from fuel injection pump (3).
4.
Remove fuel injection pump (3) and gasket (5) from timing case (6). Discard gasket.
5.
Remove O-ring (7) from fuel injection pump (3). Discard O-ring.
2
1
6
3
5
401-951
401-952
7
2
4
3
