TM 5-3895-379-23
FUEL INJECTOR AND NOZZLE REPLACEMENT (CB534B) - CONTINUED
0175 00
REMOVAL
CAUTION
Cap and plug all openings to prevent any contaminants from entering the system.
NOTE
All fuel injector nozzles are replaced the same way. One fuel injector nozzle is shown.
1.
Remove two capscrews (5) and clamp (6) from cyl-
5
inder head (4).
2.
Remove fuel injector (7) and washer (8) from cylin-
der head (4).
3.
Remove nozzle (2), gasket (9) and spacer (10) from
injector (7). Discard gasket.
INSTALLATION
1.
Install spacer (10), new gasket (9) and nozzle (2) on
6
fuel injector (7).
2.
Install washer (8) and fuel injector (7) to cylinder
head (4).
3.
Install clamp (6) and two capscrews (5). Tighten
capscrews gradually and evenly to 9 ft-lb (12 Nm).
7
9
10
2
8
401-2008
4.
5.
6.
Start engine (TM 5-3895-379-10) and check for leaks.
END OF WORK PACKAGE
0175 00-2