TM 5-3895-379-23
VIBRATION PUSH SWITCH REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
References
Tools and Special Tools
TM 5-3895-379-23P, Figure 78
Equipment Condition
Materials/Parts
Engine off (TM 5-3895-379-10)
Gasket (2)
Drums chocked (TM 5-3895-379-10)
Packing, preformed
Battery disconnect switch in OFF position (TM 5-
3895-379-10)
REMOVAL
1.
Remove retainer ring (1) and cap (2) from grip housing (3) and (4).
CAUTION
Do not turn handle more than one full turn. Handle cannot be removed by unscrewing and should not be
forced or turned more than needed to allow access to screws and nuts.
2.
Loosen grip housings (3) and (4) on handle pipe (5) by turning grip housings counterclockwise not more than one
full turn.
2
1
3
4
5
401-474