TM 5-3895-379-23
ENGINE START SWITCH REPLACEMENT - CONTINUED
0079 00
REMOVAL - CONTINUED
4.
Remove nut (8) from lock assembly (9).
5.
Remove lock assembly (9) from instrument box assembly (4).
8
4
9
STEERING WHEEL SHOWN REMOVED FOR CLARITY
401-472
NOTE
12
13
Tag and mark all wires prior to removal.
17
16
6.
Remove screw (10), wire (11) and lockwasher (12)
from START terminal (13). Discard lockwasher.
14
7.
Remove screw (14), wire (15) and lockwasher (16)
10
from BATTERY terminal (17). Discard lockwasher.
8.
Remove screw (18), wire (19) and lockwasher (20)
from RELAY terminal (21). Discard lockwasher.
11
21
20
19
18
401-473
15
INSTALLATION
1.
Install new lockwasher (20) and wire (19) on RELAY terminal (21) with screw (18).
2.
Install new lockwasher (16) and wire (15) on BATTERY terminal (17) with screw (14).
3.
Install new lockwasher (12) and wire (11) on START terminal (13) with screw (10).
NOTE
Tab of starter switch fits in notch of instrument box assembly to properly align starter switch in instru-
ment box assembly.
4.
Position lock assembly (9) in instrument box assembly (4).
5.
Install nut (8) on lock assembly (9).
0079 00-2