TM 5-3895-379-23
MUFFLER AND TAILPIPE REPLACEMENT - CONTINUED
0048 00
INSTALLATION - CONTINUED
WARNING
Use caution when handling heavy parts. Provide adequate support during procedure. Failure to follow this
warning may cause injury.
5.
Position clamp (6) on top port of muffler (4) and
6
install muffler in tube assembly (12). Hold muffler in
11
8
10
place.
7
12
9
6.
Position clamp (10) over end of muffler (4).
8
7.
Install clamp (10) on plate assembly (11) with washer
(8), screw (9), washer (8) and nut (7). Tighten nut to
33-47 lb-ft (44-64 Nm).
4
10
401-392
8.
Position clamp (6) on overlap of top port of muffler
5
(4) and tube assembly (12) and tighten nuts (5) to 17-
27 lb-ft (23-37 Nm).
9.
Position clamp (2) on side port of muffler (4) and
6
install exhaust tube (3) in muffler.
1
10.
Position clamp (2) on overlap of side port of muffler
(4) and exhaust tube (3) and tighten nuts (1) to 17-27
lb-ft (23-37 Nm).
4
3
2
401-395
11.
Close right- and left-side door assemblies (TM 5-3895-379-10).
12.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0048 00-5/(0048 00-6 Blank)