TM 5-3895-379-23
MUFFLER AND TAILPIPE REPLACEMENT - CONTINUED
0048 00
REMOVAL - CONTINUED
8.
Remove two screws (23), washers (24), clamps (25),
25
cables (26) and plate assembly (11) from flywheel
23
27
housing (27).
24
11
25
26
401-394
INSTALLATION
1.
Install plate assembly (11), two clamps (25) and cables (26) on flywheel housing (27) with two washers (24) and screws
(23). Tighten screws to 60-90 lb-ft (81-122 Nm).
2.
Install bracket (15) on engine (22) with two washers
18
(21) and screws (20). Tighten screws to 60-90 lb-ft
(81-122 Nm).
19
3.
Install new gasket (18) and tube assembly (17) on tur-
bocharger assembly (19) with three nuts (16). Tighten
21
nuts to 33-47 lb-ft (44-64 Nm).
22
16
4.
Install clamp (14) on tube assembly (19) and in
bracket (15) with two nuts (13). Tighten nuts (13) to
20
17-27 lb-ft (44-64 Nm).
17
14
13
15
401-393
0048 00-4
