TM 5-3895-379-23-2
0260
REMOVAL - Continued
10.
Remove locknut (Figure 4, Item 8), washer (Figure 4, Item 5), washer (Figure 4, Item 6), washer
(Figure 4, Item 5), and screw (Figure 4, Item 4) from bracket (Figure 4, Item 10) and engine lifting bracket
(Figure 4, Item 9). Discard locknut.
11.
Remove two screws (Figure 4, Item 3), washers (Figure 4, Item 2), and bracket (Figure 4, Item 10) from
hydraulic oil cooler (Figure 4, Item 1).
12.
If damaged, remove mounting (Figure 4, Item 7) from bracket (Figure 4, Item 10).
3
2
4
5
6
1
10
7
9
5
8
M0178SWR
Figure 4. Hydraulic Oil Cooler and Fan Shroud Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00198)